Salient Power Solutions and PSI Power & Controls have merged and rebranded under the Salient name.

Combo Rotary Manual Transfer Switch With Cam-Lok Receptacles

small_product1
small_product1
small_product1
small_product1
small_product1
small_product1
small_product1
small_product1

UL standard 1008:2014 Ed.8+R:24Sep2018 100-1200 Amps, up to 600 Volts.

Description

Save space & money with our new combination manual transfer switch and generator tap box with Cam-Lok receptacles

This offering comes in two sizes: 400–800 amp and 1200–2400 amp NEMA 3R enclosures.

Our new combination manual transfer switch and generator tap box features Cam-Lok receptacles with an assortment of configurations available to meet any application. This combination product comes pre-wired from Salient, with the Cam-Lok connectors of a generator tap box already wired to the manual transfer switch component.

This helps cut down on additional wiring and save space in tight confines where it may come at a premium. It also helps minimize additional wiring for a simpler backup generator load transfer solution.

Both variants of the product include a lockable Cam-Lok section on your choice of the left- or right-hand side, a sub-panel, and a drip shield. Customers can also choose between 208–240 volt, 480 volt, and 575–600 voltage variants of the product as needed.

400–800 Amp Manual Transfer Switch With Cam-Loks

  • Cam-Loks can be installed on right- or left-hand side
  • Cam-Lok section has lockable door
  • 60″ H x 42″ W x 20″ D with sub-panel
  • Wall-mount or free-standing if bottom tabs are removed
  • Non-fusible and fusible for 400, 600, 800 amp
  • Drip shield is also included

1200–2400 Amp Unit

  • Cam-Loks can be installed on right- or left-hand side
  • Cam-Lok section has lockable door
  • 90″ H x 44″ W x 24″ D with sub-panel
  • Floor-mount or free-standing
  • Non-fusible
  • Drip shield is also included

Cam-Lok connectors can be mounted on either side of the enclosure. Wiring from the Cam-Lok connectors to the transfer switch comes prewired by Salient. Perfect for when space is at a premium. This eliminates wiring between the manual transfer switch and the generator tap box.

They’re built to NEMA 3R enclosure ratings, with switch components labeled UL1008 through 1200 amps and IEC-rated 1600 through 3000 amps.

Product Usage

A manual transfer switch with an integrated generator tap box is useful in any number of load transfer applications. Most frequently used to easily transfer a building’s electrical supply from a standard electrical supply to a backup generator during outages and interruptions.

When combined with a generator, a manual transfer switch allows for a quick and painless transition to backup power as needed, without the need for specific wiring and backup power for each device or system.

This manual transfer switch is shipped pre-wired by Salient to minimize the need for additional wiring to a generator tap box, allowing you to save time and space in any configuration. The addition of convenient Cam-Lok receptacles under a locking door makes switching power sources easier and safer than ever.

Customers installing Salient’s combination manual transfer switch with Cam-Lok receptacles should familiarize themselves with all relevant specifications, standards, and diagrams before beginning. Make sure to follow the instructions for your specific unit based on amps, fusible or non-fusible, Cam-Lok mounting side, and three-pole or four-pole switch.

Resources
Product Brochure Terms and Conditions
Accessories

Salient offers a variety of electrical components, kits, and cables compatible with your combination manual transfer switch with Cam-Lok receptacles, including but not limited to:

Phase loss, phase reversal & under-voltage kit. Correct common problems encountered with manual transfer switches and backup generators with this simple kit.

Cam-Lok power cables. Combine a set of color-coded Cam-Lok power cables with your manual transfer switch for painless, effective load transfers when the power goes out. Available at any length with your choice of male or female connectors. Continuous color coding is available at an additional cost.

Contact Your Rep Today